Plex media server

Плагины и каналы в PLEX Media Server

PLEX Media Server поддерживает установку плагинов и каналов.

Каналы — доступ к популярным стриминговым сервисам. Многие сервисы не будут интересны, т.к. предназначены для англоязычных пользователей.
Но если вы пользуетесь сервисами для просмотра сериалов «Soap4Me» или «Kino.Pub», то для них доступны плагины PLEX. Что это дает? Доступ к контенту с любого устройства, единый интерфейс и т.п. Правда реализован доступ через плагины.

Плагины — расширение функциональности PLEX Media Server. Из популярных плагинов можно установить «Кинопоиск», при индексации фильмов будет заполнена информация о фильмах, загружен постер и т.п.

Какие каналы доступны на Plex Live TV?

Как и во многих потоковых сервисах, доступность каналов будет зависеть от того, в какой точке мира вы находитесь.

Согласно собственной литературе Plex, более 80 процентов каналов сервиса доступны во всем мире, при этом «меньшая часть каналов лицензируется только в Соединенных Штатах».

Некоторые из доступных каналов включают Reuters, Yahoo Finance, Fubo Sports Network, KidsFlix, EDGE Sport, IGN TV, BAMBU и Docurama.

В сентябре 2020 года Plex добавил кучу испаноязычных каналов . К ним относятся Latido Music, Sony Novellas, Sony Comedias и другие.

Plex пообещал, что в ближайшие месяцы и годы к сервису будет добавляться больше каналов.

NAS Device

Running a Plex Media Server on a NAS device is a popular option as it allows for an all-in-one device that not only runs the server, but also stores lots of content. However, most NAS devices have some limitations when it comes to running a Plex Media Server, so it may not be the best choice for everyone.

Related Page: NAS Devices

Supported NAS Devices

Plex Media Server is compatible with a broad range of devices from a large number of NAS manufacturers. However, not every model from every manufacturer is compatible. We have a spreadsheet listing compatible models and basic information about them.

Tip!: If you’re in the market to buy a NAS to run Plex Media Server, make sure it’s compatible before you purchase it.

Related Page:

Should You Run Plex Media Server on a NAS?

As mentioned earlier, running Plex Media Server on a NAS device can be a great choice for some users, but it may not be appropriate for everyone.

By far, the biggest limitation that most users will encounter is that most consumer NAS devices don’t have very powerful CPUs. In some cases, the device will run on an ARM-based processor that’s not capable of transcoding content at all. Other times, it may run on an Intel processor that’s technically capable of transcoding, but the processor may be too slow to transcode fast enough for most uses.

We have a detailed article to help you decide whether or not it’s the right choice.

Tip!: Before choosing to run Plex Media Server on your NAS, make sure that it’s appropriate for your own particular usage situation.

Related Page:

Last modified on: April 30, 2019

Есть ли у Plex Live TV какие-либо ограничения?

К сожалению, поскольку эта услуга бесплатна и основана на партнерстве с крупными телевизионными сетями в данной стране, у нее есть некоторые ограничения, о которых вам необходимо знать.

Во-первых, нельзя приостанавливать или перематывать прямые телеканалы. Если вы пропустите начало фильма или спортивного мероприятия, вам просто нужно принять это.

Во-вторых, нет функции видеорегистратора. Это отличается от поддержки Plex каналов OTA, которая позволяет вам делать записи через приложение Plex.

Являются ли эти ограничения справедливым компромиссом с учетом количества бесплатного контента? Мы так думаем, но вам нужно будет принять решение самостоятельно.

4. Оптимизируйте свои видео Plex.

Функцию оптимизации лучше всего рассматривать как «предварительный транскодер». Это позволяет вам выбирать определенные видео и конвертировать их в другой формат.

Например, если вы знаете, что хотите посмотреть «Историю игрушек», «Красавица и чудовище» и «Бэтмена» на своем iPad во время путешествия на следующей неделе, вы можете заранее оптимизировать видеофайлы. Это означает, что они будут немедленно готовы к игре на выбранном вами устройстве. Дальнейшего перекодирования не потребуется.

Оптимизация мультимедиа полезна, даже если вы знаете, что многие люди будут одновременно смотреть видео удаленно, поскольку это снизит нагрузку на ваш процессор.

Вы можете оптимизировать отдельное шоу, серию или даже всю библиотеку. Для начала перейдите к контенту, который хотите отредактировать, нажмите на три горизонтальные точки и выберите « Оптимизировать» .

В новом окне вы можете выбрать, хотите ли вы оптимизировать определенное количество видео или только непросмотренные видео

Что еще более важно, вы можете установить качество оптимизации. Вы можете выбрать Оптимизировать для мобильных устройств , Оптимизировать для ТВ , Исходное качество или Пользовательское

Параметр Custom позволяет указать конкретное устройство, разрешение и битрейт.

Если вы настроили длинный список элементов для оптимизации, вы можете управлять очередью, выбрав « Настройки»> «Статус»> «Конверсия» . Вы можете управлять уже оптимизированными файлами в разделе «Настройки»> «Управление»> «Оптимизированные версии» .

Player Apps and Platforms

    • Getting Started with Alexa Voice Control
    • Alexa Voice Commands
    • Navigating the Mobile Apps
    • Customizing the Mobile Apps
    • Settings: Plex for Android (mobile)
    • Unlocking or Activating Plex for Android
    • What are the features and limitations without unlocking the app?
    • Android, Android TV, Fire TV, Portal Logs
    • Purchasing a Plex Pass Subscription Through Google Play
    • Android Auto
    • I have Plex Pass, so how do I use Plex for Android for free?
    • Purchasing a Plex Pass Subscription Through Amazon
    • Opening a Local Video File (mobile)
    • Navigating the Big Screen Apps
    • Customizing the Big Screen Apps
    • Settings: Android TV
    • Android, Android TV, Fire TV, Portal Logs
    • Purchasing a Plex Pass Subscription Through Google Play
    • Purchasing a Plex Pass Subscription Through Amazon
    • How do I use the old TV Layout with pre-4.4 Android devices?
    • Navigating the Big Screen Apps
    • Customizing the Big Screen Apps
    • Settings: Plex for Apple TV
    • How do I get Plex content to show up in the Top Shelf?
    • How do I delete content using the Apple TV app?
    • Do I need a Plex account to use the Apple TV app?
    • Apple TV Logs
    • Casting Support
    • Cast from Browser or Desktop
    • Cast from Android
    • Cast from iOS
    • Does content stream directly to the Chromecast or through the casting device?
    • Why does the Chromecast show my BT router page?
    • Why can’t I see Chromecast on my Amazon-based Android device?
    • Why can’t I see Chromecast on my iOS 5 device?
    • Navigating the Mobile Apps
    • Customizing the Mobile Apps
    • Settings: Plex for iOS
    • Unlocking or Activating Plex for iOS
    • Purchasing a Plex Pass Subscription Through iTunes
    • iOS Media Playback
    • Using Mobile Sync
    • iOS Logs
    • Do I need a Plex account to stream locally?
    • What are the features and limitations without unlocking the app?
    • Can I use the in-app purchase with Family Sharing?
    • Can I AirPlay if I require secure connections and have DNS Rebinding protection?
    • Will Plex work on my older iOS devices?
    • iOS App System Permissions
    • NAS Compatibility List
    • NAS Devices and Limitations
    • Is Plex Media Server on a NAS Right for Me?
    • Mounting Network Resources
    • Installing Plex Media Server on FreeNAS
    • Install Plex Media Server on a TerraMaster NAS
    • Western Digital My Cloud Home
    • Setting Up and Managing Plex Media Server on NVIDIA SHIELD
    • Media Storage Options for NVIDIA SHIELD
    • Accessing SHIELD Storage
    • Limitations When Running Plex Media Server on NVIDIA SHIELD
    • Moving server data storage location on NVIDIA SHIELD
    • Navigating the Big Screen Apps
    • Customizing the Big Screen Apps
    • Settings: PlayStation
    • What media formats are supported?
    • Why can’t it find my local server?
    • Where is Plex for PlayStation available?
    • Logging for PlayStation
    • Is it for the PlayStation 3 or PlayStation 4?
    • Is it available for the PlayStation TV and PlayStation Vita?
    • Is a PlayStation Plus subscription required?
    • Getting Started
    • Navigating the Big Screen Apps
    • Customizing the Big Screen Apps
    • Settings: Plex Media Player
    • Controlling the App
    • Audio Configuration Guide – Plex Media Player
    • Create your own inputmap
    • Plex Media Player Logs
    • Advanced Configuration
    • Uninstalling Plex Media Player
    • How do I set up WiFi on an embedded Plex Media Player?
    • Is Plex Media Player based on Kodi/XBMC?
    • How do I create the disk image for my SD Card or USB Stick?
    • Customizing Plex Web
    • Overview
    • Opening Plex Web App
    • Cinema Trailers & Extras – Plex Web App
    • Why are there old or duplicate Server entries in the Dashboard sidebar?
    • Interface Overview
    • Using the Library View
    • Viewing Item Details
    • Plex Web App Player
    • Plex Web App Settings
    • Search
    • Devices
    • Server Status and Dashboard
    • Plex Account
    • Updating Plex Web App
    • Plex Web App Logs
    • Navigating the Big Screen Apps
    • Customizing the Big Screen Apps
    • What models are supported for the Plex for Roku channel?
    • Purchasing a Plex Pass Subscription Through the Roku App
    • Settings: Plex for Roku
    • Roku Logs
    • Is 4K content supported on the Roku?
    • Do I need a Plex account to use the Roku channel?
    • Is Plex for Roku open source?
    • Plex VR for Gear VR & Oculus Go
    • Plex VR for Daydream
    • Navigating the Big Screen Apps
    • Customizing the Big Screen Apps
    • Which Smart TV models are supported?
    • Why can’t it find my local server?
    • What media formats are supported?
    • How do streaming quality selections work?
    • Logging for Smart TVs & TiVo
    • Requirements for using Plex for Sonos
    • Control Sonos Playback With a Plex App
    • Installing the Plex for Sonos Service
    • Navigating Plex for Sonos
    • Sonos Playback
    • Introduction and Installation
    • Configuration and Usage Options
    • Download for Offline Access – Windows & MacOS
    • Windows/Mac app logs
    • Audio Configuration
  • Xbox

    • Settings: Xbox
    • Xbox One Logs
    • Xbox One Controller Mapping
    • What media formats are supported?
    • Why can’t the Xbox One app find my local server?
    • What information is sent to Microsoft?
    • Is Xbox Live Gold required?

Шаг третий. Создание сертификата.

Для Windows. Пользователям необходимо предварительно скачать и установить OpenSSL Win 32 light и  Visual C++ 2008 Redistributable Package (x86).

Далее запускаете командную строку (cmd.exe) с правами администратора и выполняете следующую команду:

C:\OpenSSL-Win32\bin\openssl.exe req -new -nodes -newkey rsa:2048 -out C:\trailers.pem -keyout C:\trailers.key -x509 -days 7300 -subj “/C=US/CN=trailers.apple.com” -config C:\OpenSSL-Win32\bin\openssl.cfg

Затем:

C:\OpenSSL-Win32\bin\openssl.exe x509 -in C:\trailers.pem -outform der -out C:\trailers.cer

И напоследок:

type C:\trailers.key >> C:\trailers.pem

Для OS X и Linux. Юзеры запускают Terminal и выполняют команды:

openssl req -new -nodes -newkey rsa:2048 -out ~/Desktop/trailers.pem -keyout ~/Desktop/trailers.key -x509 -days 7300 -subj “/C=US/CN=trailers.apple.com”

Далее:

openssl x509 -in ~/Desktop/trailers.pem -outform der -out ~/Desktop/trailers.cer && cat ~/Desktop/trailers.key >> ~/Desktop/trailers.pem

Затем перемещаем 3 файла (trailers.pem, trailers.key, и trailers.cer) из корня диска C (для Windows) или с рабочего стола (для MacOS/Linux) в папку \assets\certificates\ каталога PlexConnect.

Наконец можно запустить PlexConnect.

Пользователи Windows запускают файл PlexConnect.py и разрешают доступ Python.exe в сеть.

Пользователи MacOS выполняют в терминале команду:

sudo “/Applications/PlexConnect-master/PlexConnect.py”

Пользователи Linux в терминале переходят к каталогу с PlexConnect и выполняют команду:

sudo ./PlexConnect.py

Теперь можно переходить к следующему шагу.

Intro to Plex

    • What is Plex?
    • Quick-Start & Step by Step Guides for Plex Media Server
    • Plex: Free vs Paid
    • Exploring More of Plex
    • Plex Media Server Requirements
    • Internet and Network Requirements
    • What is Plex Pass?
    • Plex Pass Feature Overview
    • Free Access to Plex Apps
    • Plex Pass Subscription Management
    • Early Access & Beta Releases
    • Sales Tax information
    • Plex Accounts
    • Sign in to Your Plex Account
    • Use Google, Facebook, or Apple to Sign in with Plex
    • Secure Your Account with Two-Factor Authentication
    • Account Audio/Subtitle Language Settings
    • I forgot my Plex Account PIN; how can I reset it? How can I change my PIN?
    • Why can’t the Plex app find or connect to my Plex Media Server?
    • Why is my video stream buffering?
    • How do I choose the right Streaming Quality in an app?
    • Why is some of my content not found?
    • Is Plex like Netflix?
    • Changelogs and Release Notes
    • Log Files
    • Why don’t videos from iTunes, Amazon, etc. play?
    • Using plex.tv resources information to troubleshoot app connections
    • Is Plex Illegal?
  • Guides

    • Connect a Player App to Your Plex Account
    • Using Hardware-Accelerated Streaming
    • Automatically Adjust Quality when streaming
    • How to Use Secure Server Connections
    • Server Settings – Bandwidth and Transcoding Limits
    • Accessing a Server through Relay
    • Reporting Security Issues
    • Getting Started with Plex Music
    • Quick Guide to Mobile Sync
    • Forum Community Guidelines
    • License Information

Plex Subtitles

For those who have trouble hearing or simply enjoy closed caption when streaming, Plex also has the ability to enable subtitles.

Prior to integrating subtitles with your content, you must have an OpenSubtitles account. OpenSubtitles works with Plex and tons of other apps as shown in our Subtitle guide below:

The process for Plex, however, is a little different than other streaming apps. Follow the guide below to enable subtitles within Plex:

1. Launch Your Plex Server and click Settings (tool icon) in the upper right-hand corner

2. Select Agents and choose Plex Movie

3. Click the Gear icon next to OpenSubtitles.org

4. Enter your OpenSubtitles login credentials, choose your language preferences, and click Save

5. Check the box next to OpenSubtitles

6. Return to the homepage of your Server and click the options button next to the content you want subtitles added and select Refresh All Metadata

7. When prompted, click Refresh

8. Wait for metadata to refresh and that’s it! You can now enjoy Subtitles on your synced content from any device.

To activate subtitles on your Plex Client app, simply play your chosen content and enable within settings of the movie/tv show.

Enjoy!

VPN on the Plex Media Server Computer

The platforms on which some Plex apps run don’t allow us to actively scan the network to try and find available Plex Media Servers. Other platforms don’t allow direct communication to any private IP (e.g. any IP on your local network). Among others, the PlayStation, Smart TVs, and Xbox apps are affected by these restrictions.

That means we have to get connection information in another way, which is provided when both the Plex Media Server and the app sign into your Plex account. This is accomplished because your Plex Media Server will send its private and public IP address to plex.tv, which can then be retrieved and used by the Plex app to find servers.

When using a VPN (Virtual Private Network), the IP information can be incorrect because of the VPN and thus the Plex app doesn’t have the correct/necessary information to be able to find your Plex Media Server and connect.

What You Can Do

Essentially, you want to make sure that your VPN isn’t interfering when your Plex Media Server sends the connection information to plex.tv.

  1. Disable the VPN
  2. Launch Plex Media Server
  3. Ensure that the Server successfully signs in under Settings > Server > General
  4. Enable the VPN

When You Should Do It

You should take the above steps whenever new connection information would be sent to plex.tv, which includes:

  • Launching or restarting the Server
  • Signing in to the Server
  • Whenever your computer experiences a network change (e.g. a laptop switching from wired to wireless connection)

Last modified on: April 12, 2019

General Troubleshooting

Here are some general troubleshooting steps you can take:

  • Ensure you have the current version of Plex Media Server installed
  • Ensure that Plex Media Server is actually actively running
  • Verify that your Server is listed on your page
  • Disable any VPN on your computer or router
  • Disable any proxies being used on your computer or router
  • Make sure you aren’t requiring secure connections on the server while using an app that doesn’t support them (see below)

Once you’ve checked those:

  1. Sign out of your Plex account in both the app and Plex Media Server
  2. in the Server
  3. Then sign into your account in the Plex app

Depending on whether your app is local or remote to the Server, there are also other things to check. If you continue to have an issue, then posting details in our support forums will be the best resource for you. See the Related Page information for additional information you can gather.

Related Page: Plex Support ForumsRelated Page:

App and Server Are on the Same Network

When both your Plex app and Plex Media Server are on the same local network:

Make sure both the Server and app are on the same subnet of the network

Tip!: Make sure the subnet mask (netmask) is set correctly, so that the devices are actually treated as being on the same subnet.

App Is Remote from the Server

If your app is not on the same network as your Plex Media Server:

Ensure that Remote Access has been successfully enabled for the Server

Related Page:

Can’t Access Server Settings

In some cases, you may find that the Server entry doesn’t appear for you under Settings in the web app and thus you can’t try to sign in to the Server. This often occurs when you’re not yet signed in on the Server and you’re using the hosted Plex Web App.

  1. Load the “” on your Server computer using or , for instance
  2.  to the Plex Web App
  3. Access the Server settings and sign in to the Server

Once you’ve done that, your Plex Media Server should appear when using the hosted Plex Web App, too.

Related Page: Related Page:

Using a Third-Party App That Cannot Sign In

Starting with version 1.1.0 of Plex Media Server, security improvements were made to help protect users. Basically, if you are signed in to Plex Media Server, then apps accessing the server must also be signed in.

In rare cases, you may have an old, deprecated app that does not support signing in such as LG’s “Media Link” or “Smart Share” apps. To allow such apps to access your Plex Media Server, you will need to make a specific exception for them.

  1. Find out the local IP address of the device on which the app is running. You will typically be able to find this in the device’s system settings.
  2. In your Plex Web App, go to Settings > Server > Network.
  3. Enter the IP address from step one into the List of IP addresses and networks that are allowed without auth setting and save.

Opening the Plex Web App on a Device Other than the Server Itself

On the Same Local Network

To open Plex Web App from a different device than the server computer while still on the same network:

  1. Open a browser window
  2. Type into the address bar (e.g “http://192.168.1.5:32400/web”)
  3. The browser will connect to the server and load Plex Web App

On a Different Network

If you’re on a different network than the server computer (or the entire “local network” is not in the private network IP ranges), you’ll first need to set up a SSH tunnel so that you can access things as if they were local.

Tip!: This is only necessary for the initial setup. Once you’ve gone through the setup, you can access as normal.

macOS or Linux

  1. Open a Terminal window or your command prompt
  2. Enter the following command (substituting the IP address of your server as appropriate):
  3. Open a browser window
  4. Type into the address bar
  5. The browser will connect to the server as if it were local and load Plex Web App

Windows

If you’re using Windows on your local system and your server is on Linux or macOS, you’ll need to use an application such as Putty or Windows 10’s built-in SSH client that can create the SSH tunnel for you. You can use instructions like these for setting up the Putty/SSH connection. If following that, you would use this information:

  • Gateway: ip.address.of.server
  • Source Port: 8888
  • Destination: localhost:32400

Once you have the SSH tunnel set up:

  1. Open a browser window
  2. Type into the address bar
  3. The browser will connect to the server as if it were local and load Plex Web App

If your server is running Windows, then you could do a standard Remote Desktop session or similar.

Last modified on: July 9, 2020

Plex Media Server

    • Overview
    • Installation
    • Basic Setup Wizard
    • Uninstall Plex Media Server
    • Dynamically Updated Server Components
    • Plex Media Server Logs
    • Overview
    • Library Actions
    • Creating Libraries
    • Editing Libraries
    • Deleting Libraries
    • Scanning vs Refreshing a Library
    • Matching Process
    • Emptying Library Trash
    • Analyze Media
    • Monitoring Library activity
    • Migrating a TV library to use the new Plex TV Series Agent/Scanner
    • Advanced Settings Plex TV Series Agent
    • Manage Recommendations
    • Upgrading a Movie library to the use the new Plex Movie Agent
    • Advanced settings Plex Movie Agent
    • Collections
    • Overview
    • General
    • Remote Access
    • Optimized Versions
    • Agents
    • Library
    • Plugins
    • Network
    • Transcoder
    • Languages
    • DLNA
    • Scheduled Tasks
    • Extras
    • Troubleshooting
    • Live TV & DVR (Set Up and Manage)
    • Scanners
    • Metadata Agents
    • Migrating a TV library to use the new Plex TV Series Agent/Scanner
    • Advanced Settings Plex TV Series Agent
    • Upgrading a Movie library to the use the new Plex Movie Agent
    • Advanced settings Plex Movie Agent
    • Overview
    • Streaming Media: Direct Play and Direct Stream
    • Transcoding Media
    • Troubleshooting
    • Is Plex Media Server on a NAS Right for Me?
    • NAS Devices and Limitations
    • NAS Compatibility List
    • Mounting Network Resources
    • Installing Plex Media Server on FreeNAS
    • Install Plex Media Server on a TerraMaster NAS
    • Western Digital My Cloud Home
    • Setting Up and Managing Plex Media Server on NVIDIA SHIELD
    • Media Storage Options for NVIDIA SHIELD
    • Accessing SHIELD Storage
    • Limitations When Running Plex Media Server on NVIDIA SHIELD
    • Moving server data storage location on NVIDIA SHIELD
    • Why is some of my content not found?
    • What kind of CPU do I need for my Server?
    • How do I delete something from my Library?
    • Why does Plex Media Server say my content is unavailable?
    • Why am I locked out of Server Settings and how do I get in?
    • Plex Media Server can’t sign in to Plex account or be claimed
    • Why is ‘Plex Transcoder’ using my CPU when nothing is playing?
    • Why is there an unclaimed media server on my network?
    • Why is my Plex Media Server directory so large?
    • Western Digital My Passport Wireless Pro
    • Netgear Nighthawk X10 Router
    • What are video preview thumbnails in Plex?
    • How do I manage my media and Plex Media Server?
    • Windows: Errors trying to upgrade, install, or uninstall Plex Media Server
    • How do I use multi-disc support for my music libraries?
    • If a transcode is “throttled”, is that bad?
    • Crash Logs: Plex Media Server
    • Windows: Transcoder failures during playback, live TV, or DVR recording
    • Plex Media Server Logs
    • Why can’t the Plex app find or connect to my Plex Media Server?
    • Why is my video stream buffering?
    • Troubleshooting Remote Access
    • Does the computer have to stay running?
    • Why do I get the “This server is not powerful enough to convert video” message?
    • Platforms no longer supported by Plex Media Server
    • How do I see what is being played by Plex apps?
    • How do I get subtitles to work?
    • Why does content I deleted on my drive still show up?
    • Windows: Repeated crashes of Plex Media Server
    • Where is the Plex Media Server data directory located?
    • Where are Plex Media Server cached images stored on my computer?
    • Why does iTunes launch when Plex Media Server is started?
    • Why does CPU usage spike for Plex Media Server when it’s not doing anything?
    • How do I add theme music for a TV show?
    • What network ports do I need to allow through my firewall?
    • Why are ISO, VIDEO_TS, and other Disk Image Formats Not Supported?
    • How to add Plex’s package signing public key to Synology NAS Package Center
    • Reporting issues with Plex Media Server
    • Why do I get metadata but no images for my library items?
    • Windows: “Key not valid for use in specified state” error and transcoding/analysis issues
    • Windows: Local Plex Web App times out or never loads
    • Clearing Plugin/Channel/Agent HTTP Caches
  • Advanced Topics

    • Advanced, Hidden Server Settings
    • Enable repository updating for supported Linux server distributions
    • Mounting NTFS Drives on Linux
    • Linux Permissions Guide
    • Authentication for local network access
    • Backing Up Plex Media Server Data
    • Scheduled Server Maintenance
    • Move Media Content to a New Location
    • Move an Install to Another System
    • Move Viewstate/Ratings from One Install to Another
    • Repair a Corrupt Database
    • Restore a Database Backed Up via ‘Scheduled Tasks’
    • Restart Plex Media Server Setup from Scratch
    • Gather a Process Dump or Sample Process
    • Finding an authentication token / X-Plex-Token
    • Plex Media Scanner via Command Line
    • Plex Media Server URL Commands

Клиенты для PLEX Media Server

Для PLEX существует множество официальных клиентов под все популярные платформы:

  • мобильные платформы (iOS, Android, Windows Phone),
  • десктопные платформы (macOS, Windows, Linux),
  • SMART-телевизоры,
  • ТВ-приставки (Apple TV 4, Chromecast, Amazon Fire TV, Roku, Android TV, Xbox, PlayStation).

UI и UX для всех клиентов выполнены по единым правилам, перемещение с одного устройства на другое не вызывает трудностей, а взаимодействие с приложениями в процессе использования приносит удовольствие.

Официальный клиент для Apple TV4 и хак для Apple TV3

Для Apple TV4 доступно официальное приложение PLEX в App Store, а для установки на Apple TV3 потребуются некоторые действия.

Среди предустановленных приложений на Apple TV3 нет PLEX, как и нет Jailbreak’а для третьей версии, но есть одна лазейка в приложении “Трейлеры”. Весь контент в трейлерах — простая веб страница, которую можно подменить.

OpenPLEX позволяет сформировать контент для приложения “Трейлеры”, сгенерировать сертификаты.

В итоге необходимо прописать DNS на приставке и на открытии «Трейлеров» будет запускаться упрощенный клиент PLEX.

Вернемся к Apple TV 4. Для неё доступна установка официального приложения из App Store. Apple накладывает ограничения на разработчиков, но клиент работает стабильно, выглядит так же прекрасно, как iOS или веб клиенты.

PLEX для iOS

Приложение «PLEX» для iOS бесплатное, но включает два типа встроенных покупок (In App Purchase):

  • бессрочная разблокировка проигрывания;
  • активация PLEX Pass на 1 месяц.

С первым пунктом более-менее все понятно, он снимает 2-х минутное ограничение на проигрывание трека или просмотр фильма. За него нужно заплатить один раз in-app-purchase и забыть.

Про подписку PLEX Pass я расскажу чуть позже, а сейчас вернемся к использованию приложения на iOS с разблокированными функциями:

Стриминг без ограничений. Если сервер доступен во внешней сети, не обязательно синхронизировать контент на телефоне.
Синхронизация контента для проигрывания оффлайн

Самолет или деревня, не важно где, но контент будет доступен без сети.
Выгрузка медиатеки (фотографий и видео) на PLEX Media Server.

Plex’s use of cookies

Necessary cookies make our site work. We’d also like to enable analytics cookies, optional to you, to help us improve the site and your experience. This tool will set a cookie on your device to remember your preferences once you have accepted. You can change your mind and change your consent choices at any time by returning to this site.

For more information on how these cookies work please see our Tracking Technologies page.

Necessary cookies

Necessary cookies enable core functionality on our site, such as security, network management, and accessibility. You may disable these by changing your browser settings, but it may affect how the site functions.

Analytics cookies

Analytics cookies help us improve our website by collecting and reporting information on how you use it; we specifically use Google analytics to derive insights about who is doing what on our site. These cookies collect information anonymously.

OFF

Third Party Cookies

Third-party cookies enable us to correctly attribute traffic driven to our site; specifically, we use Facebook cookies to measure performance of Facebook campaigns, as well as cookies from Commission Junction, which help us see traffic directed to our site by affiliates we work with in marketing.

OFF

Accept All

Reject All

2. Ограничьте скорость загрузки.

Одна из лучших функций Plex — это возможность передавать контент за пределы вашей сети. Он имеет два основных применения: позволяет вам смотреть видео Plex, когда вы находитесь вдали от дома, и предоставлять доступ к серверу друзьям и семье, чтобы они могли пользоваться вашей библиотекой.

Настроить удаленный доступ очень просто. Просто перейдите в « Настройки»> «Настройки»> «Удаленный доступ» и нажмите « Включить удаленный доступ» .

Однако вы также можете настроить скорость загрузки. Это особенно верно, если у вас нет высокой скорости загрузки от вашего интернет-провайдера или если несколько человек будут транслировать контент одновременно. Ограничение скорости предотвратит замедление вашей домашней сети до сканирования при подключении удаленных пользователей.

Вернитесь в « Настройки»> «Настройки»> «Удаленное подключение к сети» и прокрутите вниз, пока не доберетесь до скорости загрузки в Интернет . Вы можете установить максимальную скорость интернета, заполнив следующее поле. Ниже вы можете установить максимальный объем емкости, который может использовать Plex. Разверните раскрывающееся меню, чтобы сделать свой выбор.

Setting up Plex on Kodi

The Plex Kodi addon needs just a bit of configuration before you can begin streaming the media on your Plex server to your Kodi device. You’ll need to link your Plex account before you can browse your media libraries.

Select the Plex Kodi addon from the Addons menu, then click it to launch the addon.

Next, click the Sign in button to begin associating your Plex account with this device.

Take note of the code displayed on your screen, then open your browser and go to https://plex.tv/link.

Next, log in to Plex however you prefer.

Then type in the code you were given by the Plex Kodi addon and click the Link button to associate the device with your account.

You’ll see a green check if your device has been associated correctly.

Now open Kodi and you’ll see your Plex content displayed on the screen. The addon is configured and ready to use.

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Adblock
detector